Biostar Hi-Fi H81S2 Ver. 6.0 Drivers Update

Download the latest drivers for your Biostar Hi-Fi H81S2 to keep your Computer up-to-date. Driver Version: , Vendor: Realtek. Supported OS. Motherboard. Biostar - Hi-Fi H81S2 ATX LGA Motherboard. (0 Average / 0 Ratings) Specifications. Manufacturer. Biostar SATA 6 Gb/s. 2. In the motherboard ranking, Asus H81M-A performs better than Biostar Hi-Fi H81S2 Ver 6x. Find out why!

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further Biostar Hi-Fi H81S2 Ver. 6.0 vendor reserves the right to revise this publication and to make changes Biostar Hi-Fi H81S2 Ver. 6.0 the contents here without obligation to notify any party beforehand. All the brand and product names are trademarks of their respective companies. Specifications in Other Languages Before you start installing the motherboard, please make sure you follow the instructions below: Hold the board on the edge, do not try to bend or flex the board.

Loose parts will cause short circuits which may damage the equipment.

Buy BIOSTAR Hi-Fi H81S2 Ver. 6.x, motherboard in UAE

Sharp pins on headers and connectors Rough edges and sharp corners on the chassis Damage to wires that could cause a short circuit 1. The package contents may be different due to the sales region Biostar Hi-Fi H81S2 Ver. 6.0 models in which it was sold. For more information about the standard package in your region, please contact your dealer or sales representative. Locate the CPU socket on the motherboard Note1: Remove Pin Cap before installation, and make good preservation for future use.

The motherboard might equip with two different types of pin cap. Please refer below instruction to remove the pin cap.

• Biostar Hi-Fi H81S2 Ver. motherboard for PC Gaming by Biostar
• Biostar Hi-Fi H81S2 ( bitcoin )
• Driver Scape
• About this product

Pull the socket locking lever out from the socket and then raise the lever up. Remove the Pin Cap.

Hold processor with your thumb and index fingers, oriented as shown. Align the notches with the socket. Lower the processor straight down without tilting or sliding the processor in the socket. The CPU fits only in one correct orientation.

Biostar Hi-Fi H81S2 Drivers Download for Windows 10, , 7, Vista, XP

Hold the CPU down firmly, and then lower the lever to locked position to complete the installation. Place the CPU fan assembly on top of the installed CPU and make sure that the four fasteners match the motherboard holes.

Orient the assembly and make the fan cable is closest to the CPU fan connector. Ensure the fastener slots are pointing perpendicular to the heatsink. Press Biostar Hi-Fi H81S2 Ver. 6.0 two fasteners at one time in a diagonal sequence to secure the CPU fan assembly in place. As each fastener locks into position a click should be heard.

Do not forget to connect the CPU fan connector. For proper installation, please kindly refer to the installation manual of your CPU heatsink.

The fan cable and connector may be different according to the fan manufacturer. System Fan Header Note: When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin 2, and the black wire is Ground and should be connected to pin 1 GND.