HAMA 3-Way USB 2.0 Hub Driver
Hama USB Hub and Card Reader, Aluminium. Reads SD memory cards with three USB extension scokets. Hama 32in1 Card Reader, USB & USB Hub, 3-way. USB Devices Combo USB Hub/Card Reader. abx High-Res Image - Hama, 32in1 Card Reader. find list of usb-hubs such as hama-usbhub-type-cbus-powered, Orico 4 Port 2x USB-C - 2x USB Hub White Orico 4 Port USB Hub Black.
|Supported systems:||Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10|
|Price:||Free* [*Free Registration Required]|
HAMA 3-Way USB 2.0 Hub Driver
- USB Port Hub - Ireland
- Cables, Wires and Adapters (computer accessories) HAMA - price comparison
- Hama USB 2.0 Hub 4fach Weiß - Accessories
- USB Port Hub
- Shop by category
- Hama 4 Way USB 2.0 Hub Port Bus Powered Small PC Laptop Computer Black
It is bus-powered hub, but it is very cheap and small and works after a small modding: Now there is common contacts: Tested on my Raspberry Pi. Anker 7 Port USB 3.
Input is a USB 3. This hub uses an external 12V switching type power supply.
Hama USB Hub Drivers Download - Update Hama Software
It does not function as a bus powered hub. The hub does not backpower the Raspberry Pi, and appears to have complete isolation on the 5V HAMA 3-Way USB 2.0 Hub between the input port and output ports. The 7th port is a BC 1. The manual status up to 2 A can be supplied on the charge port, when no other devices are connected.
Hama USB 2.0 Hub 4 Way Port Bus-powered Small PC Laptop Computer Blue
With the hub powered and no devices connected, I measured the following voltages on the charge port: With power applied and no devices connected, I measure the following voltages on the ports: P0 input 0V, P1 5. Has been powering a Model 2 fine, have not yest tested heavily with USB devices.
This is a 4-port switching hub that enables the "sharing" of up to four USB devices between two computers. Whilst it may be powered externally, it does take power from both connected computers.
If one of them is, say, a netbook or laptop, that may provide sufficient extra power to enable the use of USB devices that the Pi alone cannot handle. If you don't do both, boot-loops are likely to occur. Due to HAMA 3-Way USB 2.0 Hub hub back-feeding power, Model B rev 2 boards will occasionally crash with this hub connected every 24 hours for one user.
Model B rev 1 appear to be stable.
Unlike my last hub, will power Wi-Fi! Tested with kernel 3.
More testing to come. Was not able to record audio properly via a Soundblaster Play! Tends to draw power from the Pi. USB Audio peripheral tested and working. There is a video showing this hub powering both the Raspberry Pi several peripherals at once . Internally two 4 Port switches linked. Also works while powering the Raspberry Pi. Shows in lsusb as two Genesys Logic, Inc. There is a voltage problem on the left half of the hub 4 ports that do not deliver HAMA 3-Way USB 2.0 Hub current to feed a wifi dongle tested with an RTLS ; you should not use these ports for anything important keyboard keys will stick, self-powered USB hard disk will reset continuously.
Hama 4 Way USB Hub Port Bus Powered Small PC Laptop Computer Black eBay
The remaining 3 ports on the right half are instead working as expected. Without an external power supply it can run at least keyboard, mouse and USB dongle.
Does not work at all; tested with keyboard, mouse and one external USB-powered hard disk. May be this is the problem reported into known issues page. When connecting some devices it kills the Ethernet with "smsc95xx Failed to read register index 0xX" errors.
It did work for a keyboard and webcam. Bluetooth that works connected directly to the Raspberry Pi triggers the error.
This one consists also of two 05e3: The power supply is rated at 5 V 2 A.